The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Re: Re: Re: White LED Lighting... was RE: Re: ADSL vs Cable


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Re: Pictures of single board computer with touch screen


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Re: Pictures of single board computer with touch screen
  • From: "Dave McLaughlin" <dave@xxxxxxx>
  • Date: Wed, 24 Apr 2002 21:15:45 +0100
  • Delivered-to: ukha_archive@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Hi Ben,

The standard digital interface can only go about 0.5 - 0.7m without
problems. To go longer you need to convert the signals to LVDS or Panel Link
as it is generally referred to when talking about LCD digital interfaces.
Advantech to a transmitter and receiver that converts the signals to Panel
Link that can drive up to about 10m on special cables. The cables for this
length tend to be expensive, but lower cost for shorter lengths.

Go to www.advantech.com and search for Panel Link or LVDS. Some of their CPU
cards have built in LVDS transmitters. I have just ordered a couple of
sample panel link receiver IC's from National Semiconductor to try and build
my own interface for the board that I have.

If the LCD you plan to use has a standard VGA input, then you will be OK for
a couple of metres as per the lead that normally comes with the PC monitor.
This tends to add a fair bit to the cost of the LCD for the VGA interface of
around 150-200 quid. A panel link tx and rx is around the 50-60 quid area
each.

Regards
Dave...

-----Original Message-----
From: bensbarn2001 [mailto:ben_wilkinson@xxxxxxx]
Sent: 24 April 2002 20:39
To: ukha_d@xxxxxxx Subject: [ukha_d] Re: Pictures of single board computer with touch
screen


Dave,

Do you have any idea how far away the screen can be mounted from the
computer?  I'm trying to find some way of using networked PCs with a
nice wall-mount to play CDs and radio (not off the web) in lots of
rooms.   The PC's digital output would then go into a local (dig) amp
for a high-quality room hi-fi with a much better user interface than
things like Linn (and cheaper) - plus it would do other things as
well.  If that screen can be mounted a couple of metres away from the
PC, then this might be a good solution.

Thanks

Ben

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.350 / Virus Database: 196 - Release Date: 17/04/2002



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.