The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: Re: [OT] Cutting up a wmv file


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: 12v -> 16v Step-up


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: 12v -> 16v Step-up
  • From: "Keith Doxey" <lists.diyha@xxxxxxx>
  • Date: Sat, 20 Apr 2002 10:47:39 +0100
  • Delivered-to: ukha_archive@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

I wouldnt do that.... I also recomended going to 230V as it is MUCH more versatile.
 
Before you know it there will be a couple of 6way plugboards screwed to the dash and all manner of things plugged in.
 
Could even be SWMBO freindly.... imagine you are running late and she still needs to dry her hair, no problem, use the hairdryer in the car. (Better pick the 1000VA model) www.bkelec.com  :-)

Keith

www.diyha.co.uk
www.kat5.tv

-----Original Message-----
From: Kevin Hawkins [mailto:lists@xxxxxxx]
Sent: 20 April 2002 01:38
To: ukha_d@xxxxxxxSubject: RE: [ukha_d] 12v -> 16v Step-up

A 12V to 16V convertor is also effectively the same thing as an invertor and because it is a bit non standard it is likely to be expensive - also the easy way of doing this does not provide enough current supply for the Fuji - so my recommendation would be to go for the 12V to 230V invertor solution even though it sounds like a round the houses solution - it will work out cheaper and also more useful in the long run as you will be able to power other mains standard devices should you so wish - you never know what is around the corner - one of those nice coiled individual cup heaters/kettles* might be just what you want next year - the one with the built in web interface perhaps..
 
    Kevin
 
*knowing you can get 12V versions before KD corrects me....
-----Original Message-----
From: Graham Kiff [mailto:graham.kiff@xxxxxxx]
Sent: 19 April 2002 21:22
To: UK HomeAutomation ListServer
Subject: [ukha_d] 12v -> 16v Step-up

Anyone know if there are DC voltage step-up device, I know step-down's
exist.
The reason I ask is I want to plug my Fuji straight into the Cigarette
Lighter in the car, instead of buying an inverter, then plugging the AC/DC
adaptor into that.

Just seems a bit stupid to have to do the following:
      12vDC -> 230vAC -> 16vDC
when surely you could just go:
      12vDC -> 16vDC

Then again this is by no way a subject I claim to know anything about!!!

Cheers
Graham



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Yahoo! Groups Sponsor
ADVERTISEMENT
Click Here!

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.