RE: Homevision Heating/DHW

["Graham Kiff" <graham.kiff@xxxxxxx>]

I'd be very interested in seeing your "How To" Tutorial

 

Cheers

Graham

-----Original Message-----
From: Kenneth Watt [mailto:kennwatt@xxxxxxx]
Sent: 19 April 2002 08:26
To: ukha_d@xxxxxxxSubject: RE: [ukha_d] Homevision Heating/DHW

Paul,

You can do more than just control heating using the temp sensors and
thermostats and trigger events based on certain conditions.

For example my electric blanket only comes on when the outside temp is
lower than 5C, if the boiler goes out and the internal temp droops below
a pre-determined level then an alarm goes off, the morning "wake-up"
routine starts early if the external temp is low enough to allow icing
on the cars. Stuff like that is pretty easy and only requires a bit of
programming in HV but works to great effect.

My heating is totally controlled by HV and an RCS stat/Dallas DS1820s
and is the old "normal" type boiler, it's due to be replaced with a nice
combi during the summer though, Vokera IIRC, and that should be
interesting. I was intending to do a kind of tutorial for the group on
how I have done it and how I will integrate it with the combi.

HTH

K.

> -----Original Message-----
> From: Future Homes [mailto:paul@xxxxxxx]
> Sent: 19 April 2002 07:46
> To: Newsgroups
> Subject: [ukha_d] Homevision Heating/DHW
>
> Has anyone done a serious heating/dhw system using homevision with
digital
> temp sensors or any other means of temp sensing? I am in the middle of
> trying and would like to share ideas with anyone who has. I am at
weather
> compensation/optimization level and am especially interested in
talking to
> heating engineers as I feel heating is a very un used area of home
> automation and such an important one. If any one is interested please
post
> your email address to the list or contact me via email to
> paul.itc@xxxxxxx>
>
> Many Thanks
>
> Paul
>
>
>