|
>Can you get plug boards with a fuse at each socket
then?
For
agreements sake, I presume you are thinking of using a 4 way mains strip,
plugging your appliances into this, and then cutting the mains plug off
this and
plugging this into the UPS?
-
You
can get 4 way blocks with a fuse on the strip, - using one of these and an
IEC
on the end of the cable would offer you some protection, so long as you
changed
the fuse to a 5amp. - each item would be fused, but the concern is that you
overload the plugs, you may struggle to fit 13amp cable into an IEC plug
though.
Otherwise look at using an inline
fuse?
I
use IEC plugs on all my lighting gear, and fuse them all back at the
switching panel.
HTH
Daniel
***********************************************************
This message is confidential and intended for the exclusive
use of the addressee(s) only and remains the property of
Exchange FS Group plc. You should not disclose its contents
to any other person. If you are not the intended recipient
please notify the sender named above immediately.
Registered Office: Munro House, Portsmouth Road, Cobham,
Surrey, KT11 1TE. Registered in England No. 2596452
***********************************************************
| Yahoo! Groups
Sponsor |
ADVERTISEMENT
;) |
|
|
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
|