The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Re: VIA Network MP3 Project


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Re: VIA Network MP3 Project
  • From: "Mark Harrison" <Mark.Harrison@xxxxxxx>
  • Date: Tue, 9 Apr 2002 13:25:29 +0100
  • Delivered-to: ukha_archive@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Guys,

Could we try to direct issues about the Via Project to the Via list, please?

I'm not saying this to keep them _off_ UKHA - I'm happy that the project should be discussed here.

However, I am keen that we have all of the suggestions available in a single place - I don't want to have to search the UKHA_D archives to get someone's great idea about the Via in a fortnight's time ;-)

Regards,

Mark

-----Original Message-----
From: paul_watkin [mailto:paul_watkin@xxxxxxx]
Sent: 9 April 2002 13:15
To: ukha_d@xxxxxxx Subject: [ukha_d] Re: VIA Network MP3 Project


I might not have explained myself clearly, use the external PSU from
a Laptop (the omnibook I am using has a 19V 3.16A PSU) AND build a
small board to go into the case of the end product.

You then need to derive the various ATX PSU voltages (+12V, +5V,
+3.3V, 0, -5V, -12V I think, not 100% though?) using regulators which
shouldn't be too difficult or expensive and then attach the Molex
connector.

As there would be no drives in the system (highest current draw item,
especially on startup) this should be more than capable.

Not aware of anything special about an ATX PSU, but not 100% sure.

The big advantage of this is you don't need to play with 240V mains
inside whatever you are building. The HP ePC uses an external power
supply in a similar way.

Cheers

Paul
--- In ukha_d@y..., "Phil Harris" <phil@a...> wrote:
>
> > Yup that solution would work - only problem is I don't have
> > any laptop psu's nor the knowledge to put a regulator on it -
> > i'd end up blowing it up. Anybody care do take this on?
>
> No it wouldn't ... Laptops don't have a PCB inside to take the
output
> from an external PSU and convert it into an "ATX mainboard friendly"
> format.
>
> Phil



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/



________________________________________________________________________
This email has been scanned for all viruses by the MessageLabs SkyScan
service. For more information on a proactive anti-virus service working
around the clock, around the globe, visit http://www.messagelabs.com
________________________________________________________________________

Yahoo! Groups Sponsor
ADVERTISEMENT
Click Here!

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.