RE: S-video over coax

["Keith Doxey" <lists.diyha@xxxxxxx>]

Wiring is straight forward.

 

Buy an S-Video to two Phono or BNC lead, or cut an existing S-Video lead and wire a plug onto each of the Co-ax cables within.

 

BEWARE !!!!!!

 

BOTH SIGNAL PATHS MUST BE THE SAME LENGTH within a few millimetres.

 

ANY difference in signal path will result in the Colour information arriving either BEFORE or AFTER the brightness information. You will end up with a picture that looks like a badly printed magazine with the colour misaligned to the left or right of the image.

 

If you can GUARANTEE that both cables are exactly the same length you should be OK

Keith

www.diyha.co.uk
www.kat5.tv

-----Original Message-----
From: Jim [mailto:jim@xxxxxxx]
Sent: 08 April 2002 17:34
To: ukha_d@xxxxxxxSubject: [ukha_d] S-video over coax

Does anyone know where I might find wiring examples to sent s-video over two
separate coax cables?

Thank you,

Jim



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Yahoo! Groups Sponsor

ADVERTISEMENT

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.