Re: Linksys AP

["Chris Williams" <Chris@xxxxxxx>]

Hi,

When I first connected the Linksys AP I could not get SNMP working. 
I
assumed this was related to my ISDN router.  To get it working I found
I had
to change the IP address of the AP from the default 192.168.1.250 to
192.168.0.250 as all the other devices in my network have addresses
starting
with 192.168.0 and the IP Mask is set to 255.255.255.0.  I had to use
the
USB connection to do this.

Hope this helps.

Regards,

Chris Williams


----- Original Message -----
From: "Brian.G.Reynolds" <brian.g.reynolds@xxxxxxx>
To: "Ukha_D" <ukha_d@xxxxxxx>
Sent: Thursday, April 04, 2002 10:58 PM
Subject: [ukha_d] Linksys AP


> Hi all,
>
> I have installed Small Business Server over the weekend and thought
I
would
> try the SNMP link to the AP but it says it cannot find the AP, but
when I
> boot the PC that has the USB connection on it then the server can see
the
AP
> but when I try to connect it says "AP not found"
>
> I have now unplugged the USB cable but the same happens, any
suggestions?
>
> B
>
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

Yahoo! Groups Sponsor

ADVERTISEMENT

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx 
Subscribe:  ukha_d-subscribe@xxxxxxx 
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx 
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.