The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: svideo->svideo vs. svideo->RGB


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: svideo->svideo vs. svideo->RGB
  • From: "Dan Khan" <dan@xxxxxxx>
  • Date: Fri, 5 Apr 2002 12:01:57 +0100
  • Delivered-to: ukha_archive@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

On a similar off topic :)

My amp switches component video as well as svideo.  My tv has 2 rgb scarts which are both used.

Is it possible to route signals from the component video outlets on the
amp, into an RGB-enabled scart socket on the TV?  I haven't managed to=
find a cable (online) that will do component video --> RGB scart.

Any ideas?

Thanks
-Dan



-----Original Message-----
From: James Hoye [mailto:james.hoye@xxxxxxx]
Sent: 05 April 2002 11:59
To: ukha_d@xxxxxxx Subject: RE: [ukha_d] svideo->svideo vs. svideo->RGB

At the moment, I have DVD, video etc. connected to TV's scarts directly. Sound is connected to apm. Now it makes a big confusion, because you
need to use a few remotes to chose appropriate, sound and video
source...
So, I decided to connect all those devices into AV amplifier and do the
switching there, so I'll need only one remote.
I have 3 SCART connectors on the back of the TV (Sony 32"), but only o= ne
capable of receiving RGB.
On the amplifier side, I have only S-video out on S-video connector.
My question is: should I connect S-video on amp to S-video on SCART on
TV, or I should find some convertor that will convert S-video to RGB and use RGB pins on SCART.
Will I see any difference in quality?
=A0
See www.rgbtosvideo.com for details of a convertor from RGB to S-Video
(Y/C).=A0 Since most AV amps switch in the S-Video and/or composite video domain (not RGB), this would be the best thing.
=A0
A scart socket can carry RGB, composite=A0and S-Video - though not all at once.=A0 Obviously your AV scart on the back of your TV will have to
support S-Video (AV1 usually is RGB [plus composite] and AV2 and above
will usually be S-Video capable depending on your model)
=A0
Confusing?=A0 Thank the designers of the stupid scart socket - great idea in principle, poorly executed. (Cue Phil)
=A0
James H



Yahoo! Groups Spons= or
ADVERTISEMENT
3D"Click
3D""

For more information: http://www= .automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.