RE: OT Networking XP, ,NT Server, 2000 and SGI

["Mark Harrison" <Mark.Harrison@xxxxxxx>]

Pedro,

You can _probably_ change the IP address of the SGI somewhere within the
"ifconfig" command. However, there's almost certainly a better,
more GUI
way, to do it that would be SGI-specific.

A better bet might be to work out the current IP address of the SGI, and
change the other three machines to be on the same subnet as THAT - on
the basis that you/we know how to do that bit ;-)

Regards,

Mark Harrison
Head of Systems, eKingfisher

************************************************************************
****
Kingfisher plc
Registered Office: North West House, 119 Marylebone Road, London NW1 5PX
Registered in England, Number 1664812

This e-mail is only intended for the person(s) to whom it is addressed
and
may contain confidential information.  Unless stated to the contrary,
any
opinions or comments are personal to the writer and do not represent the
official view of the company.  If you have received this e-mail in
error,
please notify us immediately by reply e-mail and then delete this
message
from your system.  Please do not copy it or use it for any purposes, or
disclose its contents to any other person.  Thank you for your
co-operation.
************************************************************************
****



-----Original Message-----
From: Pedro de Oliveira [mailto:oliveirp@xxxxxxx]
Sent: 26 September 2001 15:20
To: 'ukha_d@xxxxxxx'
Subject: RE: [ukha_d] OT Networking XP, ,NT Server, 2000 and SGI


Yep, Yep, Yep.  The Switch is a simple switch with nothing to configure:
5
cat5 ports 1 12v socket. No software .
I agree - the NT machine does seem to be working as a router and I don't
want it to.  I have configured all the windows machines on the same
subnet
but have no idea of how to do this on the SGI.  I will take a look at
the
online help and see what they say.

This is for using a graphics intensive (OpenGL) package on the SGI and
being
able to control it via Exceed 3D from the PC.

Thanks to everyone for your help and especially to Ian and
pmiller@xxxxxxx (no name brand)

Pedro de Oliveira


-----Original Message-----
From: Ian Lowe [mailto:ian@xxxxxxx]
Sent: 26 September 2001 14:03
To: ukha_d@xxxxxxx
Subject: Re: [ukha_d] OT Networking XP, ,NT Server, 2000 and SGI


Firstly,

Is the switch just a simple thing, with no VLans configured, or anything
of
that nature?

Secondly, it sounds very much like your NT Server is acting as a router
between two subnets..

Best check that all of your machines are using the same subnet mask, and
are
on the same subnet. with a small network of this sort, it's usually a
good
idea to use the Private Address Space, 192.168.0.1-192.168.0.254 with a
mask
of 255.255.255.0

Ian.



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/



_____________________________________________________________________
This message has been checked for all known viruses by the
MessageLabs Virus Scanning Service. For further information visit
http://www.messagelabs.com/stats.asp