The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: KAT5 Alternatives


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: X-10 Main Interference


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: X-10 Main Interference
  • From: "Brian G. Reynolds" <brian.g.reynolds@xxxxxxx>
  • Date: Sat, 27 Oct 2001 17:41:52 +0100
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

I bought 2 off these filters from Li @ Laser for my 2 DDAR's and they
sorted
my interference problems although the kitchen light will still not work
from
a macro in the HV box.

B.

> -----Original Message-----
> From: Graham Kiff [mailto:graham.kiff@xxxxxxx]
> Sent: 27 October 2001 17:20
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] X-10 Main Interference
>
>
> Thanks Mike, that looks like just the job.
> Didn't even think to look at LetsAutomate, as I thought is was such an
> obscure problem.
>
> Thanks again
> Graham
>
> -----Original Message-----
> From: Mike Griffiths [mailto:mike@xxxxxxx]
> Sent: 27 October 2001 16:49
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] X-10 Main Interference
>
>
> here you are Graham
> http://www.letsautomate.com/10316.cfm?cfid=6069&cftoken=26510369
> I think Mike will take it back if it doesnt work
> I tend to put one on each TV and Computer it does seem to help the
system
> Mike
> At Home
>
>
> -----Original Message-----
> From: Graham Kiff [mailto:graham.kiff@xxxxxxx]
> Sent: Sat 27 Oct 01 16:33
> To: UK HomeAutomation ListServer
> Subject: [ukha_d] X-10 Main Interference
>
>
> I have recently discovered a source of interference that is blocking
X10
> signals to all appliances near the offending appliance.
>
> The cause is my NEC Plasma screen.  Not only does this interfere with
IR
> signals by producing extremely high level of background IR, I have now
> realised that when the screen is switched on, 90% of all X10
> signals do not
> reach appliances that are physcially plugged in to the same wall
socket as
> the screen.  If I put the screen in stand-by or unplug it
> completely all X10
> signals work 100% again.
>
> My question is:
> Is there a device/filter I can plug the Plasma screen into, to stop it
> intereferring with X10 signals?
>
> Many thanks
> Graham
>
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>



Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.