The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Re: OT - DECT access point


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [OT] Acceptable CPU temp?


  • To: ukha_d@xxxxxxx
  • Subject: Re: [OT] Acceptable CPU temp?
  • From: "K. C. Li" <li@xxxxxxx>
  • Date: Mon, 22 Oct 2001 23:43:20 +0100 (BST)
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

> Artic Silver has a thermal conductivity of greater than 8 W/mK,
> standard zinc oxide stuff is less than 1 W/mK.  A higher value here is
> obviously better.

While I agree that it appears to be superior to zinc oxide stuff, the
results don't automatically justify the use of it on sub 1GHz CPUs. Some
of our PCs have been running for years continuously without any heat
problems. It may be because none of the CPUs are faster than 850MHz. And
besides, we have loads of Sudocream left over.

> Of course if your heatsink isn't up to dissipating the heat then it
> doesn't matter too much what you use.

True but the reverse can also apply.

Regards,

Kwong Li
li@xxxxxxx
Laser Business Systems Ltd.
http://www.laser.com



Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.