RE: Re: Meteor

["Brian G. Reynolds" <brian.g.reynolds@xxxxxxx>]

Aha, I'm getting somewhere! I have changed the baud to 1200 and now when I
dial out it displays on-line and then displays the numbers! but when I dial
in all that is displayed is off-line.

So half of it is working!

Any further ideas?

Going out soon to move a Macaw cage!! joys of having a van! so if I am slow
replying that is why.

Thanks guys,

B.

> -----Original Message-----
> From: Stuart Whyte [mailto:stuart@xxxxxxx]
> Sent: 20 October 2001 09:48
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] Re: Meteor
>
>
> Brain,
>
> The garbage would indicat an incorrect baud rate.  Have rechecked the
> manual, the correct baud is 1200, not 2400.  Once this is changed,
> pick up your phone handset, and "ONLINE" should appear on
the
> screen.  When you dial the numbers should also appear on the screen.
>
> HTH
>
> Stuart
>
> --- In ukha_d@y..., "Brian G. Reynolds"
<brian.g.reynolds@n...> wrote:
> > Good theory, I have set HyperTerminal to port1 but still nothing
> appears.
> >
> > If I dial out I get garbage on the screen so I suppose that says
> something
> > but when I dial in from my mobile sod all, the green led flashes
as
> does the
> > red led but no characters.
> >
> > B.
> >
> > > -----Original Message-----
> > > From: ian@g... [mailto:ian@xxxxxxx...]
> > > Sent: 19 October 2001 23:11
> > > To: ukha_d@y...
> > > Subject: [ukha_d] Re: Meteor
> > >
> > >
> > > Hi
> > > No, if hyperterm will not connect to a port it means some
other
> > > software is using it or it is not a valid port. You are
allowed to
> > > have things connected to the port and start hyperterminal.
> > >
> > > Try to disable any software using comm1 then try again and
you
> should
> > > see what ever data is coming in on the selected comm port.
> > >
> > > Ian D
> > >
> > > --- In ukha_d@y..., "Brian G. Reynolds"
<brian.g.reynolds@n...>
> wrote:
> > > > I try to open term and it will not connect to comm.1 as
the
> Meteor
> > > is using
> > > > it, makes sense, so I close Meteor and the lights go
off but
> > > hyperterm
> > > > starts, also makes sense.
> > > >
> > > > Then the Meteor has the red LED on and when I dial
nothing
> shows on
> > > the term
> > > > but the LED's flash as expected.
> > > >
> > > > Do I not have to type something in term to get it to
"echo" to
> the
> > > screen?
> > > >
> > > > BTW as I dial out that is shown on the Meteor software.
> > > >
> > > > B.
> > > >
> > > > > -----Original Message-----
> > > > > From: Stuart Whyte [mailto:stuart@xxxxxxx...]
> > > > > Sent: 19 October 2001 21:49
> > > > > To: ukha_d@y...
> > > > > Subject: [ukha_d] Re: Meteor
> > > > >
> > > > >
> > > > > Brain,
> > > > >
> > > > > First off is to check that the Baud rate is right;
2400 (see
> > > Patricks
> > > > > post)
> > > > >
> > > > > When the GREEN light flashes, data should be seen
on the
> screen in
> > > > > plain text.
> > > > >
> > > > > HTH
> > > > >
> > > > > S.
> > > > >
> > > > >
> > > > >
> > > > > For more information: http://www.automatedhome.co.uk
> > > > > Post message: ukha_d@y...
> > > > > Subscribe:  ukha_d-subscribe@y...
> > > > > Unsubscribe:  ukha_d-unsubscribe@y...
> > > > > List owner:  ukha_d-owner@y...
> > > > >
> > > > > Your use of Yahoo! Groups is subject to
> > > http://docs.yahoo.com/info/terms/
> > > > >
> > > > >
> > > > >
> > >
> > >
> > >
> > > For more information: http://www.automatedhome.co.uk
> > > Post message: ukha_d@y...
> > > Subscribe:  ukha_d-subscribe@y...
> > > Unsubscribe:  ukha_d-unsubscribe@y...
> > > List owner:  ukha_d-owner@y...
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >
> > >
> > >
>
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>