Re: Meteor

["Stuart Whyte" <stuart@xxxxxxx>]

Brain,

The garbage would indicat an incorrect baud rate.  Have rechecked the
manual, the correct baud is 1200, not 2400.  Once this is changed,
pick up your phone handset, and "ONLINE" should appear on the
screen.  When you dial the numbers should also appear on the screen.

HTH

Stuart

--- In ukha_d@y..., "Brian G. Reynolds"
<brian.g.reynolds@n...> wrote:
> Good theory, I have set HyperTerminal to port1 but still nothing
appears.
>
> If I dial out I get garbage on the screen so I suppose that says
something
> but when I dial in from my mobile sod all, the green led flashes as
does the
> red led but no characters.
>
> B.
>
> > -----Original Message-----
> > From: ian@g... [mailto:ian@xxxxxxx...]
> > Sent: 19 October 2001 23:11
> > To: ukha_d@y...
> > Subject: [ukha_d] Re: Meteor
> >
> >
> > Hi
> > No, if hyperterm will not connect to a port it means some other
> > software is using it or it is not a valid port. You are allowed
to
> > have things connected to the port and start hyperterminal.
> >
> > Try to disable any software using comm1 then try again and you
should
> > see what ever data is coming in on the selected comm port.
> >
> > Ian D
> >
> > --- In ukha_d@y..., "Brian G. Reynolds"
<brian.g.reynolds@n...>
wrote:
> > > I try to open term and it will not connect to comm.1 as the
Meteor
> > is using
> > > it, makes sense, so I close Meteor and the lights go off but
> > hyperterm
> > > starts, also makes sense.
> > >
> > > Then the Meteor has the red LED on and when I dial nothing
shows on
> > the term
> > > but the LED's flash as expected.
> > >
> > > Do I not have to type something in term to get it to
"echo" to
the
> > screen?
> > >
> > > BTW as I dial out that is shown on the Meteor software.
> > >
> > > B.
> > >
> > > > -----Original Message-----
> > > > From: Stuart Whyte [mailto:stuart@xxxxxxx...]
> > > > Sent: 19 October 2001 21:49
> > > > To: ukha_d@y...
> > > > Subject: [ukha_d] Re: Meteor
> > > >
> > > >
> > > > Brain,
> > > >
> > > > First off is to check that the Baud rate is right; 2400
(see
> > Patricks
> > > > post)
> > > >
> > > > When the GREEN light flashes, data should be seen on
the
screen in
> > > > plain text.
> > > >
> > > > HTH
> > > >
> > > > S.
> > > >
> > > >
> > > >
> > > > For more information: http://www.automatedhome.co.uk
> > > > Post message: ukha_d@y...
> > > > Subscribe:  ukha_d-subscribe@y...
> > > > Unsubscribe:  ukha_d-unsubscribe@y...
> > > > List owner:  ukha_d-owner@y...
> > > >
> > > > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> > > >
> > > >
> > > >
> >
> >
> >
> > For more information: http://www.automatedhome.co.uk
> > Post message: ukha_d@y...
> > Subscribe:  ukha_d-subscribe@y...
> > Unsubscribe:  ukha_d-unsubscribe@y...
> > List owner:  ukha_d-owner@y...
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
> >