Re: HomeVision Supply Voltage...

["Alancc" <alan.cc@xxxxxxx>]

Phil
I have an unused Craplins 3U case still flat packed, do want to do a swap
for a PSU?

Alancc
----- Original Message -----
From: Phil Harris <phillip.harris1@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Thursday, October 18, 2001 9:16 AM
Subject: [ukha_d] HomeVision Supply Voltage...


>
> I know that HV is shipped with a 9v PSU but does anyone know whether
the
> regulation on it is up to the job of being driven from 12v?
>
> The reason I ask is I'm thinking of recasing it in a box that will
enable
me
> to include an expansion card or two (as Mark, Keith and a couple of
others
> have) and I have some nice and fairly meaty external drive PSUs which
put
> out 12v and 5v and don't need a load on the 5v line to supply a steady
12v
> load. (PC PSUs generally need to have load on both the 12v and 5v
lines at
> least before they work correctly.) This would mean that I could build
in
the
> PSU too which would get rid of a wall wart or two!
>
> Phil
>
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>