RE: Re: Meteor

["Brian G. Reynolds" <brian.g.reynolds@xxxxxxx>]

Good theory, I have set HyperTerminal to port1 but still nothing appears.

If I dial out I get garbage on the screen so I suppose that says something
but when I dial in from my mobile sod all, the green led flashes as does
the
red led but no characters.

B.

> -----Original Message-----
> From: ian@xxxxxxx [mailto:ian@xxxxxxx]
> Sent: 19 October 2001 23:11
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] Re: Meteor
>
>
> Hi
> No, if hyperterm will not connect to a port it means some other
> software is using it or it is not a valid port. You are allowed to
> have things connected to the port and start hyperterminal.
>
> Try to disable any software using comm1 then try again and you should
> see what ever data is coming in on the selected comm port.
>
> Ian D
>
> --- In ukha_d@y..., "Brian G. Reynolds"
<brian.g.reynolds@n...> wrote:
> > I try to open term and it will not connect to comm.1 as the
Meteor
> is using
> > it, makes sense, so I close Meteor and the lights go off but
> hyperterm
> > starts, also makes sense.
> >
> > Then the Meteor has the red LED on and when I dial nothing shows
on
> the term
> > but the LED's flash as expected.
> >
> > Do I not have to type something in term to get it to
"echo" to the
> screen?
> >
> > BTW as I dial out that is shown on the Meteor software.
> >
> > B.
> >
> > > -----Original Message-----
> > > From: Stuart Whyte [mailto:stuart@xxxxxxx...]
> > > Sent: 19 October 2001 21:49
> > > To: ukha_d@y...
> > > Subject: [ukha_d] Re: Meteor
> > >
> > >
> > > Brain,
> > >
> > > First off is to check that the Baud rate is right; 2400 (see
> Patricks
> > > post)
> > >
> > > When the GREEN light flashes, data should be seen on the
screen in
> > > plain text.
> > >
> > > HTH
> > >
> > > S.
> > >
> > >
> > >
> > > For more information: http://www.automatedhome.co.uk
> > > Post message: ukha_d@y...
> > > Subscribe:  ukha_d-subscribe@y...
> > > Unsubscribe:  ukha_d-unsubscribe@y...
> > > List owner:  ukha_d-owner@y...
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >
> > >
> > >
>
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>