[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Re: Meteor
- To: <ukha_d@xxxxxxx>
- Subject: RE: Re: Meteor
- From: "Brian G. Reynolds" <brian.g.reynolds@xxxxxxx>
- Date: Fri, 19 Oct 2001 22:39:46 +0100
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
I try to open term and it will not connect to comm.1 as the Meteor is using
it, makes sense, so I close Meteor and the lights go off but hyperterm
starts, also makes sense.
Then the Meteor has the red LED on and when I dial nothing shows on the
term
but the LED's flash as expected.
Do I not have to type something in term to get it to "echo" to
the screen?
BTW as I dial out that is shown on the Meteor software.
B.
> -----Original Message-----
> From: Stuart Whyte [mailto:stuart@xxxxxxx]
> Sent: 19 October 2001 21:49
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] Re: Meteor
>
>
> Brain,
>
> First off is to check that the Baud rate is right; 2400 (see Patricks
> post)
>
> When the GREEN light flashes, data should be seen on the screen in
> plain text.
>
> HTH
>
> S.
>
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe: ukha_d-subscribe@xxxxxxx
> Unsubscribe: ukha_d-unsubscribe@xxxxxxx
> List owner: ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
Home |
Main Index |
Thread Index
|