RE: HomeVision Supply Voltage...

["Ian B" <Ian@xxxxxxx>]

Just run a voltage regulator from 12 to 9 - problem solved. I have some
quite meaty ones if you want to give it a try.

Ian

> -----Original Message-----
> From: Phil Harris [mailto:phillip.harris1@xxxxxxx]
> Sent: 18 October 2001 09:17
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] HomeVision Supply Voltage...
>
>
>
> I know that HV is shipped with a 9v PSU but does anyone know whether
the
> regulation on it is up to the job of being driven from 12v?
>
> The reason I ask is I'm thinking of recasing it in a box that
> will enable me
> to include an expansion card or two (as Mark, Keith and a couple of
others
> have) and I have some nice and fairly meaty external drive PSUs which
put
> out 12v and 5v and don't need a load on the 5v line to supply a steady
12v
> load. (PC PSUs generally need to have load on both the 12v and 5v
lines at
> least before they work correctly.) This would mean that I could
> build in the
> PSU too which would get rid of a wall wart or two!
>
> Phil
>
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>