[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Making holes...
- To: <ukha_d@xxxxxxx>
- Subject: RE: Making holes...
- From: "Phil Harris" <phillip.harris1@xxxxxxx>
- Date: Fri, 12 Oct 2001 19:14:07 +0100
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
This might sound kinda obvious but the couple of times I used an angle
grinder at my old place to cut channels for cabling we built a small
enclosure from a couple of kingsize quilt covers that reached the ceiling
and went down to the floor - kinda like a shower curtain.
Minimal spillage out into the room...
Phil
> I did this ONCE.
> Put the goggles and protective glasses on and away i went after
about
> 10-15 mins i had the correct dimensions i needed, i turned round ...
and
> couldn't see a bloody thing ! HUGE red dust cloud took
> almost a week to
> clean the room :O( With hindsight i should have covered up the
> furniture
> first :O)
Home |
Main Index |
Thread Index
|