The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: DDAR


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: DDAR
  • From: "Brian G. Reynolds" <brian.g.reynolds@xxxxxxx>
  • Date: Thu, 11 Oct 2001 23:24:35 +0100
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Your almost the man! 1 out of 2 aint bad!

1 of the units has now got 192.168.0.19 and 1 has 192.168.0.1
The range I have set is between xxx.xxx.xxx.180 and 200, also 192.168.0.1
is
assigned to the network card from my server to the switches!

Yes I do have DHCP but it is, oops just looked, is now disabled.

Now got 169.254.147.197! and with DHCP off and re-plugged in and still will
not play the game!

Any other suggestions?

B. still confused.

> -----Original Message-----
> From: Justin [mailto:justin@xxxxxxx]
> Sent: 11 October 2001 22:27
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] DDAR
>
>
> Brian,
> do you have some sort of DHCP server on your LAN?
> I have had similar trouble while running Win Route. It was assigning
an
> address to the DDAR rather than the DDAR software itself. What I had
to do
> was disable DHCP, plug the DDAR back in (so it got its address from
the
> correct software), then re-enable Win Route.
>
> Hope that helps.
>
> Justin.
>
> > -----Original Message-----
> > From: Brian G. Reynolds [mailto:brian.g.reynolds@xxxxxxx]
> > Sent: 11 October 2001 10:14 PM
> > To: UKHA Group
> > Subject: [ukha_d] DDAR
> >
> >
> > OK what have I done to my DDAR's? I unplugged them both to check
my X-10
> > macro's and now after plugging them back in, nothing!
> >
> > I am sure it is an IP Config thing.
> >
> > I have gone into the Audio Receiver Manager/tools/ip config, and
> > entered the
> > range 192.168.0.180 to 200 but the DDAR's refuse to get new IP's,
any
> > suggestions?
> >
> > B.
> >
> >
> >
> > For more information: http://www.automatedhome.co.uk
> > Post message: ukha_d@xxxxxxx
> > Subscribe:  ukha_d-subscribe@xxxxxxx
> > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> > List owner:  ukha_d-owner@xxxxxxx
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
>




For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/





Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.