Chris,
Yes, I have some in stock - neat, small unit about 45x45mm and 35mm
deep.
12V input with open collector output - but this would need to be used with
something like HomeVision. They're the same type I'll be using in my
own
home. I've sent Phil Harris one recently and I believe he's testing
it at
the moment.
Also do a mains version which will switch 8 amps - with an adjustable
timer
>from
It's got the same PIR head as the LV PIR but also has a 70mm diameter
bezel, and
the controls are housed in a 135mm long tube behind the head. Really
designed to fit in a suspended ceiling, but you could use it in a plastered
ceiling if it was stuck into place.
Simon
----- Original Message -----
Sent: 25 November 2001 21:13
Subject: [ukha_d] Anyone found some
decent Flush Mount PIRs in the UK
I'm
still tinkering with the lighting control.
As
Mike points out bathrooms, toilets, pantry areeas etc are ideal candidates
for
PIR controlled lighting. There's also something to be said for not routing
this control through an HA interface but just use main PIR time switches
instead.
Any
one know of a good source for flush mount (cieling) PIRs - either mains or
low
voltage.
Chris
For
more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx Subscribe:
ukha_d-subscribe@xxxxxxx Unsubscribe:
ukha_d-unsubscribe@xxxxxxx List owner:
ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is
subject to the Yahoo! Terms of
Service.
Yahoo! Groups
Sponsor |
|
|
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
|