RE: Relay Control

["Justin" <justin@xxxxxxx>]

Me Me Me!!! :-)

Justin.

> -----Original Message-----
> From: Ian B [mailto:Ian@xxxxxxx]
> Sent: 12 November 2001 7:50 PM
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] Relay Control
>
>
> How many folks out there would be interested in a serial controlled
relay
> board as has been touched on before. It would have latching (turn
> on or off
> explicitly and would stay in it's current state unless power was
removed).
> This is possibly another project on my ever growing list but I have a
need
> for this at home and the commercial ones cost a fortune. One thing I
can
> promise is that it will not be this year........
>
> Ian
>
>
> > -----Original Message-----
> > From: Justin [mailto:justin@xxxxxxx]
> > Sent: 12 November 2001 13:52
> > To: ukha_d@xxxxxxx
> > Subject: Re: [ukha_d] Relay Control
> >
> >
> > Dan,
> > I have ordered some relays from Quasar and was hoping to use an
X10
> > addressable 12V power supply from
> > http://www.letsautomate.com/10681.cfm?cfid=1286&cftoken=7615
to activate
> > either the 3043 or 3044 from http://www.quasarelectronics.com/relays.htm
> >
> > The addressable power supply would effectively waste a whole
> housecode but
> > it is quite a bit cheaper than a powerflash module.
> >
> > Justin.
> >
> > ----- Original Message -----
> > From: Dan James <UKHA@xxxxxxx>
> > To: <ukha_d@xxxxxxx>
> > Sent: Monday, November 12, 2001 1:33 PM
> > Subject: [ukha_d] Relay Control
> >
> >
> > > Hi all
> > >
> > > I have finally got round to flooding the house with cable
this
> > > weekend! And am now turning my attention to controlling the
heating
> > > using Homeseer.
> > >
> > > I am looking to use Relays to control the heating, with an
option
> > > switch back to the main heating control, in case of system
failure /
> > > SWMBO not wanting to use the PC method!
> > >
> > > Anyhow my question is - is anyone away of a Circuit board
that would
> > > allow me to interface the PC with a series of Relays? - I
have looked
> > > at one on http://www.quasarelectronics.com/computer_projects.htm
> > >
> > > But this relies on you being able to tell it how long you
want to
> > > have the switch held open for (you have to set a delay
parameter in
> > > seconds). I was more hoping for a circuit that could be told
to
> > > switch on, and then switch off - a la X10. - Otherwise I
will use X10
> > > modules.
> > >
> > > Any ideas?
> > >
> > > Thanks
> > >
> > > Daniel (who does his own ironing :-)
> > >
> > >
> > > For more information: http://www.automatedhome.co.uk
> > > Post message: ukha_d@xxxxxxx
> > > Subscribe:  ukha_d-subscribe@xxxxxxx
> > > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> > > List owner:  ukha_d-owner@xxxxxxx
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> >
> >
>
>
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/