[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: All Lights On/All Units Off and Modifying an MT10
At 10:27 am +0000 12/11/01, Paul Gordon wrote:
>Trouble with that is, I believe, that many of the X10 modules don't
support
>the "All lights off" command either, - this includes LM12's
and the wall
>switches. (not sure about DIN modules though..), so it's not actually a
>great deal of use...
For info...the DIN modules do support all lights on and off.
Also the RF remote + RF X10 wall wart support these commands.
I know because all lights off is very useful to turn off lights at bedtime.
(One house code per area)
I very pleased with DIN modules. The 'soft start' back to last level
is good unless someone else has used the light or light has been used
for a different purpose.
So everyone needs their own light settings and system needs to know
what you want to do (reading / telly / ironing)
Solution....build brain analysis and fingerprint recognition into
each wall light switch!!!
Martin
Home |
Main Index |
Thread Index
|