RE: Re: Channelling in walls

["James Hoye" <james.hoye@xxxxxxx>]

> sorry for being daft, but I assume these cut a surface channel?? New
> to the whole DIY thing.

We've all got to start somewhere!  You can cut (or 'chase' as it's called)
without any fancy tools.  I have successfully done (and documented this)
using a masonary drill bit, drill, hammer and cold chisel/bolster.  See
http://www.home-automation.info/
for a HOWTO.  Follow the 'Converting
sockets' link under the DIY heading.  At the bottom of that page, there's a
link to another page detailing fitting a new socket - including chasing for
the conduit.  Of course, if you've got plasterboard walls, then most of it
won't apply ;)

Of course, having done this quite a lot, I've invested in a new tool every
now and then that makes these jobs a bit easier - like an SDS Plus drill,
and more recently a box sinker tool and SDS Plus chisel bits.  It's an
expensive hobby initially - but most tools should last for many, many
years.

> Also do you guys line your channels with mini trunking or something
> else.

There are various sizes and shapes of conduit that can be used, from 20 or
25mm round PVC type to oval and capping.  Look in your local DIY store and
you should find a selection.  I tend to use Wickes, but it depends on which
one is nearest/convenient to you.

James H


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/