RE: Audio signal distribution.

["Kenneth Watt" <kennethwatt@xxxxxxx>]

What I want to distribute is a feed from the DDAR, an old tape deck or
whatever, basically stuff that I do not need or want in each room because,
although still in use, it is not heavily used. Although the DDAR will be
;o)

I would like to go down the whole house audio route but currently that is
an
expensive option and the gear I have is just stuff that's been accumulated
over the years from various sources and for various reasons. So buying a
whole house amp kinda winds me up as I have tons of other stuff, like three
micro systems, five amps and god knows how many speakers of varying sizes
and qualities and I can't help but feel all that gear will go to waste if I
install a full house type system. I could however, get HV to control each
unit in each room individually via IR and this thought has crossed my mind
on more than one occasion!

For example: for an IR code to switch on the kitchen micro system:

If
DDAR flag is set
Then
Transmit IR signal once #xx (set JVC to AUX input)
End if

Dunno, reckon it would work? I have sussed how to get HV to recognise IR
signals other than the standard remote codes so this should be an easy task
to get it to do this.

K

-----Original Message-----
From: 	Graham Howe [mailto:graham@xxxxxxx]
Sent:	25 May 2001 20:06
To:	ukha_d@xxxxxxx
Subject:	RE: [ukha_d] Audio signal distribution.

If each room has it's own CD/Radio then what exactly do you
want to distribute over line level?

Graham



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

<<attachment: winmail.dat>>