The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Project] Example idea detail


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: [Project] Example idea detail
  • From: "James Hoye" <james.hoye@xxxxxxx>
  • Date: Thu, 24 May 2001 17:13:01 +0100
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

This email was delivered to you by The Free Internet,
a Business Online Group company. http://www.thefreeinternet.net
---------------------------------------------------------------
> Set channel x to level ##%

Will you be able to load dimming profiles?  I ask because light level is
non-linear with phase angle, and different lamp types (ie. halogen, GLS)
are
likely to have slightly different characteristics - or is this not
noticable
in practice?

There is almost certainly a requirement to be able to set 50% bright and
mean half bright, so some mapping needs to be done.

Looking very good so far.

What about feedback to the switch, ie. the dim level or scene being shown
via a LED segment display?

James H




Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/




Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.