[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: [Project] IREDS
- To: <ukha_d@xxxxxxx>
- Subject: RE: [Project] IREDS
- From: "Jon Whiten" <jon@xxxxxxx>
- Date: Sun, 20 May 2001 16:04:58 +0100
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
How's about:-
7 (+ 1) Channels
CH #1 IR LED on-board
CH #2 - #7 Plug-in emitters
CH #8 Virtual Channel for Broadcasting to all emitters at this node.
To keep things simple, arrange it so that the plug-in emitters use, say a
Mono 3.5mm jack plug and Stereo Skt. Plugging in an emitter also shorts
Ring-to-screen which could be used to detect "Emitter Present" -
No
Dip-switches to set.
??????
Regards,
Jon
+--------------Personal------------+----------Work-----------+
Jon Whiten Church Gresley D.G. Controls Limited
Derbyshire Beacon Lamp Specialists
jon@xxxxxxx England mail@xxxxxxx
http://www.whiten.co.uk/
http://www.deegee.com
+----------------------------------+-------------------------+
> -----Original Message-----
> From: Ian Lowe [mailto:ian@xxxxxxx]
> Sent: 20 May 2001 15:45
> To: ukha_d@xxxxxxx
> Subject: Re: [ukha_d] [Project] IREDS
>
>
>
> So, your Controller would need to be able to interrogate the zone
> boxes for
> something like dip settings, to figure out what channels/zones
> were in use,
> and would provide an interface onto the Ethernet.
>
>
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|