Re: SCART weirdness

["Justin" <justin@xxxxxxx>]

Sorted :-)

 

Thanks to everyone for your help.

 

FYI my TV is a JCV (spot on Keith!) before I cut the wire to pin 19 in the SCART plug I had a look at the settings of the TV. It was set  to output TV -> SCART 2, I changed this to AV3 (the inputs on the front of the set which I don't use) -> SCART 2. Perfect!!!

 

I should learn to RTFM ;-)

 

Thanks again,

 

Justin

----- Original Message -----

From: Justin

To: ukha_d@xxxxxxx

Sent: Thursday, May 17, 2001 10:26 PM

Subject: [ukha_d] SCART weirdness

Hi all,

Recently joined the group and hoped someone here can offer some advice on the following problem.

 

I have recently moved my av gear into a cupboard putting it some distance from my TV so I purchased 2 x 5m SCART leads. When anything is hooked up to SCART 2 the picture is utter crap (like a badly tuned TV station), I mean it's just not watchable, however if I use SCART 1 the picture is fine.

 

If the picture was bad regardless which SCART socket was being used I would put it down to using 5m leads but it's only SCART 2 that is a problem.

 

Incidentally, everything was ok when the gear was under the TV.

 

Cheers

 

Justin

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Yahoo! Groups Sponsor

www.

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.