The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: VGA monitor/keyboard switch



> fail on restart after power failure because there's no keyboard!  The
> switch is likely to be left on my PC 99% of the time.
>
> Thanks for the part no, and I found a 4 way one for about 20 quid on
DABS
> as well.
>
> HOWEVER Inmac have the omnicube for 80 quid.
>
> Given that cables are going to be 40/50 quid anyway is it false
economy to
> buy the cheap one?

woah! slow your roll Nick, the cables I baught to go with my 10 quid
switcher
were about 8 quid each, for a VGA & keyboard pair (from DABS). The part
code
in my earlier mail was for a 4 way switcher too.

If you're going to leave the switch in 1 position 99% of the time, then why
bother spending 80 quid on an omnicude?

Also, most BIOS'  have the ability to choose which errors to halt on, so
you
tell it not to bother waiting if it has no keyboard.



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/




Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.