The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: Technology


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Selling your Automated Home


  • To: ukha_d <ukha_d@xxxxxxx>
  • Subject: RE: Selling your Automated Home
  • From: Keith Doxey <ukha.diyha@xxxxxxx>
  • Date: Fri, 11 May 2001 11:45:32 +0100
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

What would also be handy is TWO buttons under the rocker of the existing switch instead o fthe single one.
 
ie. Press top of switch.....Momentary = ON , Held = Bright
    Press bottom of switch.....Momentary = OFF, Held = Dim.
 
Keith
-----Original Message-----
From: Phil Harris [mailto:phillip.harris1@xxxxxxx]
Sent: Thursday, May 10, 2001 15:20
To: ukha_d@xxxxxxxSubject: RE: [ukha_d] Selling your Automated Home

What we need is a simple X10 switch that sends on / off / bright / dim commands *ONLY* just like an IR543 but which fits in a standard UK wall box and can be set to a single X10 address...
 
...oh yeah, and doesn't look like a piece of poo!
 
Li?
 
Phil
-----Original Message-----
From: Mike Griffiths [mailto:mike@xxxxxxx]
Sent: 10 May 2001 14:58
To: 'ukha_d@xxxxxxx'
Subject: RE: [ukha_d] Selling your Automated Home

Not if you don’t have any light switches any more L

J J J

Mike Griffiths

 

-----Original Message-----
From: Steve Cooper [mailto:steve.cooper@xxxxxxx]
Sent: Thu 10 May 2001 14:54
To: ukha_d@xxxxxxxSubject: RE: [ukha_d] Selling your Automated Home

 


If you need to revert the lighting system back to normal you can do the
following:

1) remove the DIN rail module
2) wire the Live and switch wires from the top of the modules together
3) replace any momentary switches with normal ones

This will give a normal lighting circuit configuration.  Of course they
might wonder about why all the lights are wired back to one place.

This won't work however if you have wired a 2 way switching circuit by
having momentary switches in parallel.

Steve


                                                                                                                                            
                    "Michael Mc Aree"                                                                                                       
                    <michael.mcaree@thomp        To:     <ukha_d@xxxxxxx>                                                           
                    son.co.uk>                   cc:                                                                                        
                                                 Subject:     RE: [ukha_d] Selling your Automated Home                                      
                    10/05/01 14:12                                                                                                          
                    Please respond to                                                                                                       
                    ukha_d                                                                                                                  
                                                                                                                                            
                                                                                                                                            




I had to get my house rewired and put in LD11 all over the show. When I go
to sell the house it will be 'buyer beware'. Same way I had to get a survey
done when I bought it and found that it would need rewired. The LD11s' work
fine without any automation so I will just leave them. I figure the ?500
cost for them will be absorbed by the house over the next 10 years anyway.
In my previous house I replaced the LW10 switches with normal ones and
unplugged the lamp modules, removed the cameras etc when I moved.

Michael
BELFAST

> -----Original Message-----
> From: Ian Lowe [mailto:ian@xxxxxxx]
> Sent: 10 May 2001 13:05
> To: ukha_d@xxxxxxx
> Subject: Re: [ukha_d] Selling your Automated Home
>
>
> I'm interested in this also: one of the things holding me back from a
> rollout of LD11s etc is the effect on the resellability of the house!
>
> Ian.
>
>
> ----- Original Message -----
> From: "Phil Johnson" <whiskybob@xxxxxxx>
> To: <ukha_d@xxxxxxx>
> Sent: Thursday, May 10, 2001 12:26 PM
> Subject: [ukha_d] Selling your Automated Home
>
>
> Hi all,
>
> Purely out of interest, has anyone had experience of selling
> their automated
> home, or have you made provisions to revert your highly tuned, automated
> central nervous system back to being a fully manual home which is
> habitable
> by people who have difficulty setting their video clocks?  Anyone sold on
> their automated home and had support calls from the new occupants?
>
> So many questions, but just it is a concern of mine before I go and
embark
> on a major wiring project...
>
> Regards,
> - Phil
>
>
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/


###############################################
This e-mail, and any attachment, is confidential. If you have received
it in error, please delete it from your system, do not use or disclose
the information in any way, and notify me immediately. The contents of
this message may contain personal views which are not the views of the
company, unless specifically stated.
#################################################




Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/






Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.




Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Yahoo! Groups Sponsor
Win a
Spa Escape

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.