[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Conversion to DIN rail......still
- To: <ukha_d@xxxxxxx>
- Subject: RE: Conversion to DIN rail......still
- From: "Phil Harris" <phillip.harris1@xxxxxxx>
- Date: Mon, 7 May 2001 20:53:47 +0100
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Make sure you buy a consumer unit with a non-transparent lid and then it
doesn't matter...
*grin*
Or I can print you out a full size picture of a set of nicely lined up DIN
modules in an enclosure which you can stick to the front.
Phil
> -----Original Message-----
> From: Julian Driver [mailto:julian@xxxxxxx]
> Sent: 07 May 2001 20:50
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] Conversion to DIN rail......still
>
>
> Er, its fastening it to the rail I'm interested in at this stage, not
> the electrickery bit.
>
> Any help on that anybody?
> --
> Julian Driver
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
Home |
Main Index |
Thread Index
|