The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Setting code for LM15 - any pointers ?


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Re: Conversion of appliance modules to DIN rail


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Re: Conversion of appliance modules to DIN rail
  • From: "Keith Doxey" <ukha.diyha@xxxxxxx>
  • Date: Mon, 7 May 2001 19:43:30 +0100
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Just looked at the lamp module and the component you have to remove to
disable local control is a diode. Neither end of the diode is connected
directly to the live so I doubt this is possible but I will search for a
wallswitch diagram to compare.

Keith

> -----Original Message-----
> From: Stuart Whyte [mailto:stuart@xxxxxxx]
> Sent: 07 May 2001 19:30
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] Re: Conversion of appliance modules to DIN rail
>
>
>
> >
> > Thanks for the info.  Where can I find the diagram??
>
> DOH!!
>
> Didnt notice the attachment on the bottom.
>
>   Also, would the same be possible with a lamp module?
> >
> > S.
>
>
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>



Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.