The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Re: Coax Cable


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Re: Coax Cable
  • From: "James Hoye" <james.hoye@xxxxxxx>
  • Date: Fri, 4 May 2001 21:02:03 +0100
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

This email was delivered to you by The Free Internet,
a Business Online Group company. http://www.thefreeinternet.net
---------------------------------------------------------------
> You Mentioned CAT5, do you use Screened or Unscreened ?

I would say unscreened is perfectly OK.  The twisting of pairs provides a
degree of immunity to noise.  Keith's KAT5 modules use balanced line
drivers - so any noise is picked up on both cables which cancels out at the
other end.  I'm sure Keith and others can explain more eloquently, but KAT5
should work over 200m without too many problems, and possibly further.

James H



Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.