[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Confusion getting homevison onto TV
- To: ukha_d@xxxxxxx
- Subject: RE: Confusion getting homevison onto TV
- From: Paul Miller <pmiller@xxxxxxx>
- Date: Thu, 22 Mar 2001 17:47:29 -0000
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
not to my knowledge, but I'm begging someone to prove me wrong (without
spending oodles of cash) PLEASE!
-----Original Message-----
From: Graham Howe [mailto:graham@xxxxxxx]
Sent: 22 March 2001 17:41
To: UKHA List (E-mail)
Subject: [ukha_d] Confusion getting homevison onto TV
I want to be able to show homevison messages on TVs around the house,
with
the messages broadcast over the top of the existing TV program, is this
possible? I can see that it is possible to have a composite video feed
passed into Homevision and then the 'combined image' to be sent back out
as
composite video. I can take a composite feed and modulate it so that it
appears on a dedicated channel. I can also use a signal
booster/distributor
to pass UHF around the house.
I can see that if I had an aerial feed into a video recorder, took a
composite video feed out of that and into homevision, took a composite
video
feed (with overlay) out of homevision and into an rf modulator, took the
rf
output from the modulator and into the booster/distributor I would then
have
'TV overlayed with Homevision' throughout the house, but everyone would
be
watching the same channel to see the messages.
Am I missing some simple solution or is it impossible to achieve what I
want
to do.
Just in case this lot doesn't make sense, here is the bottom line:
Can I have homevision messages displayed over the top of terestrial TV
simultaneously on two TVs that are watching different channels?
Regards
Graham
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|