RE: Source of A/V connectors and a STP termination question

["Graham Howe" <graham@xxxxxxx>]

Thanks for that, but I have pretty big cable (cable talk 3.1) and prefer
using a bare wire connection rather than banana plugs, hence the 'screw
down' ones sold by maplin. Trouble is I can't seem to find those sold
separately.

Graham

> -----Original Message-----
> From: Steve Morgan [mailto:steve@xxxxxxx]
> Sent: 11 March 2001 21:34
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] Source of A/V connectors and a STP termination
> question
>
>
> I use standard 4mm "Banana" plugs and sockets.
>
> What about stock code 738-525 for sockets, mounted in a
> standard 1-gang
> blanking plate, with some appropriate plugs. There's gold
> plated ones in
> black (531-447) and red (531-453).
>
> For your low-level stuff, I'd be inclined to look at mounting
> a SCART socket
> for simplicity.
>
> Cheers,
> Steve
> -----Original Message-----
> From: Graham Howe [mailto:graham@xxxxxxx]
> Sent: 11 March 2001 20:26
> To: UKHA List (E-mail)
> Subject: [ukha_d] Source of A/V connectors and a STP
> termination question
>
>
> I want to get some A/V connectors for mounting on a wall to
> act as cable
> outlets. Starting with speaker outlets, I would like
> something like the
> binding posts seen here
> https://catalogue.maplin.co.uk/Pictures/12/4/61FR67X.JPG
but
> these seem to
> be out of stock at my local maplins and on their site, I
> suspect they are
> discontinued. Also they are a bit pricey and I am sure I
> should be able to
> get hold of just the fittings for mounting myself. Whilst I'm
> at it I want
> something similar for interconnects (line level) and probably
> also s-video,
> composite video and scart. I am looking for good quality in
> all cases. I am
> sure all this stuff should be available at the rswww site,
> but a search for
> 'speaker binding posts' brings back nothing and I can't see an obvious
> section in their catalogue (online).
>
> On a completely separate point, does anyone know how to wire
> up a shielded
> CAT5e RJ45 socket, I know how to punch down the usual 8
> coloured wires of
> course, but don't quite see how to attach the shielding to
> (one or both) the
> additional black posts found on the shielded socket. I have
> received these
> shielded sockets by mistake (at no extra xharge) and thought
> it might be
> useful for terminating my shielded eight core alarm cable.
>
> Regards
>
> Graham
>
>
> Yahoo! Groups Sponsor
>
> Register
>
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
>
> ------------------------ Yahoo! Groups Sponsor
> ---------------------~-~>
> Make good on the promise you made at graduation to keep
> in touch. Classmates.com has over 14 million registered
> high school alumni--chances are you'll find your friends!
> http://us.click.yahoo.com/l3joGB/DMUCAA/4ihDAA/IUJVlB/TM
> --------------------------------------------------------------
> -------_->
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>