I
bought ME and found it to be the biggest pile of sh*t that I ever ran as an
OS
- I even preferred 95! Most of my apps that I use all the time wouldn't
recognise the OS to be able to install the correct version and the drivers
for
my 35mm film scanner ran at about 5% of the speed that they did on the same
machine when it had NT installed on it. That is - of course - until after
about an hour of scanning when suddenly they would start reporting back
spurious error messages before finally deciding that the CCD array in the
film
scanner had died and that was that. (A very scary moment I can tell you
until
I moved the film scanner over onto another machine and it worked
perfectly!)
None
of the flavours of Win2k that I've tried will turn off the PC when doing a
shutdown ... I too have several ATX and T based machines and *NONE* of the
ATX
machines will power off with Win2k - I always assumed it was down to
Win2k's
NT heritage!
Phil
Installed Win2K Pro on one of my machines
yesterday (finally got fed-up of Win ME).
Everything's fine except when I shut down the
PC just sits there with the message that it's safe to turn off. It
doesn't actually turn itself off like ATX machines do (and this one did
with
ME on it).
Any ideas?
Thanks
M.
Your
use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Your
use of Yahoo! Groups is subject to the Yahoo! Terms of Service.