[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Re: A quick X10 question....
- To: <ukha_d@xxxxxxx>
- Subject: RE: Re: A quick X10 question....
- From: "Paul Miller" <pmiller@xxxxxxx>
- Date: Fri, 9 Mar 2001 13:38:39 -0000
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Wrong, I'm afraid. it can be controlled by x10
-----Original Message-----
From: richard.lockyer@xxxxxxx
[mailto:richard.lockyer@xxxxxxx]
Sent: 09 March 2001 13:34
To: ukha_d@xxxxxxx
Subject: [ukha_d] Re: A quick X10 question....
I may be wrong, but I think that the module in the rf receiver can
only be controlled by radio or local control and not via X-10.
Richard
--- In ukha_d@y..., "Steve Gordon"
<steve.gordonsolutions@v...> wrote:
> Thats correct the CM12 is only an interface between the PC and the
household
> power supplies. It has a standard 240v socket incorperated but this
is not
> controlled at all by x-10 and is just direct connected through.
>
> The x-10 to RF transmitter strangly does have appliance module
capabilities
> though it is not very reliable as such and tends to stop work as an
> appliance module after a time. (At least that was my experience and
this was
> confirmed by Kwong at Laser)
>
> HTH
>
> Steve
>
> -----Original Message-----
> From: Phillip Harris [mailto:phillip.harris1@xxxxxxx...]
> Sent: 08 March 2001 19:25
> To: ukha_d@y...
> Subject: RE: [ukha_d] A quick X10 question....
>
>
> No, I understand that it isn't ... as far as I am aware it is
simply an
> interface between the power line and the PC (plus a limited
capability
> controller).
>
> Someone else mentioned to me about the CM12 having appliance module
> capabilities though so perhaps someone can tell me otherwise.
>
> Phil
>
> > -----Original Message-----
> > From: Ian Lowe [mailto:ian@xxxxxxx...]
> > Sent: 08 March 2001 19:18
> > To: ukha_d@y...
> > Subject: [ukha_d] A quick X10 question....
> >
> >
> > Okay, after twiddling for ages, I have finally jumped right in
> > with the X10
> > stuff, courtesy of Homebase closing down it's megastores/trimming
response
> > kit from it's inventory ;)
> >
> > Is the CM12 an appliance module in it's own right? if so, how do
you set
> > it's house/unit code?
> >
> > Ian.
> >
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
>
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|