RE: Curtain Control

["Phil Harris" <phillip.harris1@xxxxxxx>]

Just had a phonecall from Phil Johnson ...  he's found more IR sensors in B&Q Reading. I think he said that after getting another one for Steven there were three left.

 

Phil

 

 -----Original Message-----
From: Steven Dickson [mailto:sdickson@xxxxxxx]
Sent: 01 March 2001 12:29
To: 'ukha_d@xxxxxxx'
Subject: RE: [ukha_d] Curtain Control

That would be great Phil, I need three if they are there. I'll pmail you with my details and get some cash to you if it works out.

 

Thanks,

 

Steve.

-----Original Message-----
From: Phil Harris [mailto:phillip.harris1@xxxxxxx]
Sent: 01 March 2001 12:22
To: ukha_d
Subject: RE: [ukha_d] Curtain Control

I think that B&Q Basingstoke have some of the light sensors left ... if
anyone needs one then I'll drop in and see if they have any more.

Phil

> -----Original Message-----
> From: K. C. Li [mailto:li@xxxxxxx]
> Sent: 01 March 2001 12:13
> To: ukha_d@xxxxxxx> Subject: RE: [ukha_d] Curtain Control
>
>
> > together so they can all operate from one controller.
> Maybe the K600
> > has these lines as well?  In which case you can connect then to
>
> Unfortunately not. The K600 motor control unit ONLY has a
> connector for
> the light sensor. From what I can recall, the sensor looked
> like a simple
> Light Dependent Resistor in a small round case with a lead.
> Unfortunately
> we don't have any available to examine closely. May be
> someone with one
> could comment further.
>
> > If the K600 has a local manual control push button then you
> could use
> > this connection in the same way though this is not ideal as the
> > control is "change state" rather than seperate "open" and "close" so
> > may get confused with power fails etc.
>
> The K600 does have separate open, close and stop buttons which is
> straightforward to attach the necessary wires for external control.
> However, the case is secured by four temper-proof screws that
> we haven't
> found a suitable head for. It is not one of the common anti-temper
> screwheads. We did manage to undo them using a number of standard
> screwdrivers.
>
> Regards,
>
> Kwong Li
> li@xxxxxxx> Laser Business Systems Ltd.
> http://www.laser.com
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>




Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Yahoo! Groups Sponsor

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.