|
The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024
|
Latest message you have seen: RE: AD10 wiring for mains socket |
[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Curtain Control
- To: "'ukha_d@xxxxxxx'" <ukha_d@xxxxxxx>
- Subject: RE: Curtain Control
- From: "Steven Dickson" <sdickson@xxxxxxx>
- Date: Thu, 1 Mar 2001 12:29:02 -0000
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
That
would be great Phil, I need three if they are there. I'll pmail you with my
details and get some cash to you if it works out.
Thanks,
Steve.
I think that B&Q Basingstoke have some
of
the light sensors left ... if anyone needs one then I'll drop in and see
if
they have any more.
Phil
> -----Original
Message----- >
From: K. C. Li [mailto:li@xxxxxxx] > Sent: 01 March 2001
12:13 >
To: ukha_d@xxxxxxx> Subject: RE: [ukha_d] Curtain
Control > > > > together so they can all operate from
one
controller. > Maybe the K600 > > has these lines as
well?
In which case you can connect then to > > Unfortunately not.
The
K600 motor control unit ONLY has a > connector for > the light
sensor. From what I can recall, the sensor looked > like a
simple > Light Dependent Resistor in a small round case with a
lead. > Unfortunately > we don't have any available to examine
closely. May be > someone with one > could comment
further. > > > If the K600 has a local manual control push
button then you > could use > > this connection in the same
way
though this is not ideal as the > > control is "change state"
rather
than seperate "open" and "close" so > > may get confused with
power
fails etc. > > The K600 does have separate open, close and stop
buttons which is > straightforward to attach the necessary wires for
external control. > However, the case is secured by four temper-proof
screws that > we haven't > found a suitable head for. It is not
one of the common anti-temper > screwheads. We did manage to undo
them
using a number of standard > screwdrivers. > >
Regards, > > Kwong Li > li@xxxxxxx> Laser Business
Systems Ltd. > http://www.laser.com > > > > >
Your use of Yahoo! Groups is subject to > http://docs.yahoo.com/info/terms/ > >
Your
use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Yahoo! Groups
Sponsor |
|
|
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Home |
Main Index |
Thread Index
|
|