RE: Comfort Keypad problems.

["Graham Howe" <graham@xxxxxxx>]

I seem to remember something about the battery needing to be connected for
the security system to work (including being in the 'off' state), could it
be that the battery is actually knackered after completely discharging?

Graham

> -----Original Message-----
> From: Eamon O'Gorman [mailto:eamonogorman@xxxxxxx]
> Sent: 22 June 2001 20:18
> To: 'ukha_d@xxxxxxx'
> Subject: [ukha_d] Comfort Keypad problems.
>
>
>
> Anyone any ideas on a problem I am having with my keypads. I
> turn on my
> comfort, and the keypad beeps, but Get no voice
> announcements. The wiring
> is defiantly correct, and I have tried replacing the keypad (only one
> installed yet so I had one spare). The funny thing is, it
> used to work, but
> then stopped for no reason., The only thing that did happen,
> was the power
> was off overnight, and the battery died. I have taken the
> spare keypad and
> wired it on a short cable directly to the comfort panel, but
> no luck, all I
> get is a number of short beeps after a couple of seconds. The
> speakers do
> make a soft "noise" as if there should be a voice
> announcement, but no
> voice ?. The reset sequence is fine (LED's blink on the
> comfort panel in
> the correct manner, I just don't get the "security off"
> message on the
> keypad.  I have downloaded the default settings to comfort using
> CS-Express, but still no luck. Any advice would be appreciated.
>
> Thanks,
> Eamon
>
>
>
>
> ____________________________________
> Automated Home UK
> http://www.automatedhome.co.uk
> ____________________________________
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
>




____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/