[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: OT: Rough idea on cost
- To: <ukha_d@xxxxxxx>
- Subject: RE: OT: Rough idea on cost
- From: "Mark Kaye" <mark@xxxxxxx>
- Date: Thu, 14 Jun 2001 16:50:26 +0100
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Ahhh, great stuff! Thanks. So we're looking at £1k+ to cover the lot then
I would imagine.
Brill. Thanks (again).
M
P.S. Room is semi basement. Will make for an excellent Home Cinema ;)
That's when I can afford the gear to go in it!!
> -----Original Message-----
> From: Mark Harrison [mailto:Mark.Harrison@xxxxxxx]
>
> Materials only:
>
> A plasterboard panel is typically 1200mm wide, so you'd
> actually need 18 to
> run all the way round. The high ceilings mean you should
> probably double
> that, since realistically you'll be putting two 2400mm panels
> above each
> other and not be able to reuse the wastage on the one you cut
> short. So 36
> panels at £5.45 is about £200+vat.
>
> Allow about 50% again for the battening and fixings, so say
> £300+vat for the
> dry lining?
>
> From that, you could probably guess about £200 for the partition?
>
> The ceiling I can't help with.
____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|