RE: Computer Video and KAT5

["Keith Doxey" <ukha@xxxxxxx>]

No problem.

Keith

-----Original Message-----
From: Phil Harris [mailto:phillip.harris1@xxxxxxx]
Sent: 13 June 2001 22:17
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Computer Video and KAT5



[In my best Jerry Springer fan type voice]

"Go Keithie, Go Keithie ... It's yer birthday ..."

Put me down for an S-Vid + Stereo audio pair with termination ... I found
an
IR extender for £40 at my local Comet and that'll do to bounce the IR back
from the bedroom for the time being ... (although maybe I should just swipe
a couple of Ian B's "old" boards at the weekend while we're
trying to
automate the drowning of his house! ... *grin* I just want to be able to
watch my DVD player in bed. Now what slot did I put "Henry And
June" in?

Phil

> -----Original Message-----
> From: Keith Doxey [mailto:ukha@xxxxxxx]
> Sent: 13 June 2001 21:37
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] Computer Video and KAT5
>
>
> Hi Robert,
>
> Anything above 800x600 is a no-no without a Prograde scan converter.
Even
> then you have to throw information away. A TV will just about display
600
> lines.
>
> A converter should allow the monitor to stay connected as the
> input would be
> normal SVGA.
>
> Look at www.vinemicros.co.uk but be prepared to spend serious money
for a
> good one. It will still look inferior to a PC Graphics card with TVOut
> because the graphics card will generate the picture for the TV rather
than
> having to convert a monitor signal. Can the RiscPC not run at lower
res
> modes line the early Archimedes could. they could be connected to
> a TV or a
> 15kHz monitor.
>
> The rgbtosvideo unit is for the RGB output of a Digibox or DVD
> player which
> is 50Hz/15.625kHz unlike SVGA which is >56Hz/>38kHz depending on
graphics
> card but 56/38k minimum. A TV will not display that frequency.
>
> Collected the next batch of PCB's for KAT5 today so its back in
production
> :-))
>
> Keith
>
> -----Original Message-----
> From: Robert Chasmer [mailto:robert.chasmer@xxxxxxx]
>
> > I am now using the KAT5 AVS modules, Keith you're a genius,
> > please, please, please we want the rest of the kit. Phil says
> > so too :o)
>
> I'm getting a bit worried as well, we need to keep KAT5 secret.
> Sorry Keith.
>
> Are you going to be able to keep up with any extra demand?
> I think I'll order from the next batch.
>
> Also can anyone recommend a good and affordable convertor for moving
from
> RGB out of a computer (1024x768 / 1280x1024 / 800x600) to S-Video.
> I know you can get PC Graphic cards with S-Video out, but I want
> to plug it
> into my Acorn Risc PC, so am stuck with the on board video (uses
> a standard
> PC type socket).  The other end is distined for Kat5.
>
> Also I want to be able to keep my monitor connected at the same
> time.  I saw
> the link to www.rgbtosvideo.com but I'm not sure if thats just
> suitable for
> low res RGB.
>
>
>
>
>
>
> ____________________________________
> Automated Home UK
> http://www.automatedhome.co.uk
> ____________________________________
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>




____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/






____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/