[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Re: [Development] Lights functions required
- To: <ukha_d@xxxxxxx>
- Subject: RE: Re: [Development] Lights functions required
- From: "Dr John Tankard" <john@xxxxxxx>
- Date: Wed, 13 Jun 2001 12:19:00 +0100
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
>
> I haven't replaced a fuse in any of my DIN rail modules yet
> and they've been
> running for nearly 2 years now. My lights are all mains halogen or
> fluorescent so it seems the bulb filament falling and causing
> a short must
> be the reason other peoples fuses blow.
>
> M.
You might also have an advantage because you will have wired it in 1.5mm as
a spur it will have a higher resistance that a 2.5mm ring, its only
marginal
but it could make a difference.
John
____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|