|
|
The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024
|
|
Latest message you have seen: RE: Split aircon unit, info required
|
[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: [Development] Lights functions required
- To: ukha_d@xxxxxxx
- Subject: Re: [Development] Lights functions required
- From: "Dr John Tankard" <john@xxxxxxx>
- Date: Tue, 12 Jun 2001 21:32:19 -0000
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
---
> Fault detection.
> Subject to having spare pins available on the PIC you can detect
> No Output - fuse or relay blown
> Continuous Output - Triac blown
> No Load - All lamps disconnected (NOT INDIVIDUAL BULBS unless 1
bulb per
> dimmer)
>
Just had a idea... but perhap i have had one too many to night...
Keith we could use a current coil though a anlogue multiplexer into a
analogue port on the pic. At each shutdown i could measure the
current in each channel at a low level and compair it, that way i
could detect a blown bulb even if there are others on the same
channel. Am i good or am i pissed.
John
____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|
|