The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: Keeping Homebase in business....


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: General X10 Question.


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: General X10 Question.
  • From: "Phil Harris" <phillip.harris1@xxxxxxx>
  • Date: Mon, 11 Jun 2001 12:05:38 +0100
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Don't ask me for reasons ... all I know is that if I plug my HV's TW7223 in to a socket on one side of one of my bedrooms then my AV kit downstairs doesn't receive X10, if I plug it into a second socket less than 6ft away then the whole house is X10 aware!
 
Try getting an X10 signal strength meter from somewhere if you can ... I borrowed one and found that mains wiring really is bad at carrying a signal!
 
Phil
-----Original Message-----
From: Michael Mc Aree [mailto:michael.mcaree@xxxxxxx]
Sent: 11 June 2001 11:53
To: ukha_d@xxxxxxxSubject: RE: [ukha_d] General X10 Question.

I can understand that Phil but why can I SEND but not RECEIVE? It seems really wierd. BTW this was possible before the kitchen was rewired...
-----Original Message-----
From: Phil Harris [mailto:phillip.harris1@xxxxxxx]
Sent: 11 June 2001 10:50
To: ukha_d@xxxxxxxSubject: RE: [ukha_d] General X10 Question.

Surrounding appliances can make a difference ... washing machines and dishwashers seem notorious for attenuating X10 signals.
 
I have four PCs and a pile of external HDs in my "computer room" (in all about 14 switched mode PSUs) and one half of that room is blind to X10.
 
Phil 
-----Original Message-----
From: Michael Mc Aree [mailto:michael.mcaree@xxxxxxx]
Sent: 11 June 2001 10:34
To: ukha_d@xxxxxxxSubject: [ukha_d] General X10 Question.

I have a TouchLinc touchscreen in the kitchen which CAN X10 through the TW7223. It can't receive the 'Messages' which are basically X10 signals. If I plug it in beside the PC (where I download the software to it) then it can Recieve the messages. Why would it make a difference where it was situated to 'receive' messges only!!
 
Any ideas greatly appreciated.
 
Michael
BELFAST




____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


###############################################
This e-mail, and any attachment, is confidential. If you have received
it in error, please delete it from your system, do not use or disclose
the information in any way, and notify me immediately. The contents of
this message may contain personal views which are not the views of the
company, unless specifically stated.
#################################################




____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.




____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


###############################################
This e-mail, and any attachment, is confidential. If you have received
it in error, please delete it from your system, do not use or disclose
the information in any way, and notify me immediately. The contents of
this message may contain personal views which are not the views of the
company, unless specifically stated.
#################################################

Yahoo! Groups Sponsor
Yahoo!
Domains Yahoo!
Domains



____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.