The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Re: Anyone seen the X10 Mains Sockets on LetsAutomate?


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Re: Anyone seen the X10 Mains Sockets on LetsAutomate?
  • From: "Phil Harris" <phillip.harris1@xxxxxxx>
  • Date: Fri, 8 Jun 2001 16:21:37 +0100
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx


> That would probably work very well. It would depend on what the
> switch does on the WS10 (if it is momentary a standard switched
> socket would not work correctly) but if the switch was the problem,
> using an unswitched socket would work around this while also removing
> local control.
>
> Here is hoping Mike release the control unit on it's own.

But then we're pretty much back to a wall mounted X10 appliance switch
which
is a standard item ... and would offer local control too!

Phil




____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/




Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.