[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: DSP-AX1
- To: ukha_d@xxxxxxx
- Subject: RE: DSP-AX1
- From: "Andy Powell" <Andy@xxxxxxx>
- Date: Fri, 08 Jun 2001 23:28:45 +0200
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
The idea of the port is that an installer can basically connect their
laptop to the unit and effectively install/setup your amp in seconds...
at least that's what I suspect it's for....
What you really want is an RS232 <-> Ethernet adaptor to put your AMP
on
your network... Which would mean that with the LCD/KBD project you could
control it from almost anywhere!!!!!
Andy
-----Original Message-----
From: "Kenneth Watt" <kennethwatt@xxxxxxx>
To: <ukha_d@xxxxxxx>
Date: Fri, 8 Jun 2001 22:26:12 +0100
Subject: RE: [ukha_d] DSP-AX1
> Okay, I think I get the basic gist of the function of the serial port.
> Basically, it controls all the functions of the amp through a standard
> RS232
> using VB, fair enough, but I fail to see the point. Unless....
>
--- Tag-it! v2.0 (c) Andy Powell ,1998,1999,2000...and beyond..
As a reluctant dieter said, "A waist is a terrible thing to
mind."
____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|