The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: OT: Zonealarm Pro and shared drives


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: OT: Zonealarm Pro and shared drives
  • From: "Keith Doxey" <ukha@xxxxxxx>
  • Date: Wed, 6 Jun 2001 10:42:32 +0100
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Hi Neil,
 
Zone Alarm Pro seems to do strange things with mapped drives.
 
I had a problem whereby all my mapped drives were visible after bootup.
 
Connect to the net and my drives were still available
 
Diconnect from the net, lost all network drives and the only way to get them back was to reboot.
 
I didnt find a cure for it, I just stopped using ZoneAlarm Pro. It was a major headach for me because my email file resides on my laptop and I map to it from the desktop machine. After checking email andf then disconnecting I could no longer access any of my mail without rebooting. Strangely though, it attempts to open a file via the network then hangs. It means you also have to force the closure of the file on the remote machine otherwise it thinks the file is in use :-(
 
One thought on your problem, Try changing your network settings to "Quick Logon" that way it doesnt verify the drive is available until the first time you try to access it. It is the way I have set mine because the machines I map to arent always present and it stops anoying dialog boxes popping up asking if you wish to reconnect next time.
 
Keith
 
 
 
 
 -----Original Message-----
From: Neil F [mailto:automated@xxxxxxx]
Sent: 06 June 2001 10:30
To: ukha_d@xxxxxxxSubject: [ukha_d] OT: Zonealarm Pro and shared drives

Sorry for the OT post but I'm sure someone here will be able to help with this...
 
I've just got rid of blackice defender and moved over to zonealarm pro. This is installed on my ICS gateway machine. On this machine I connect to a network drive on another machine at boot up. Now when to ICS machine boots up, i get a dialog 'share not found, do you want to reconnect at boot up' (not exact wording).
 
Once the machine has finished booting up, i can manually reconnect the drive OK. All shares on my LAn are visible...It just seems to be the drive i want to connect at boot up thats the problem (at this point in the boot, zonealarm doesn't even seem to be loaded yet)
 
ANy suggestions
 
thanks
Neil


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Yahoo! Groups Sponsor
Check
out great fares at Orbitz!

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.