The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IR7243 send gap


  • To: ukha_d@xxxxxxx
  • Subject: Re: IR7243 send gap
  • From: andy.powell@xxxxxxx
  • Date: Fri, 1 Jun 2001 14:58:14 +0200
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

I have something similar set up. On my Pronto there are a couple of macros
set up for example "Bed Time" turns off all the av kit, starts a
timer on
the PC to dim the livingroom lights to 50% in 1 minute and then off in 5
minutes, the hall light leading up stairs 6 minutes later and the outside
lights 10 minutes .

All this is from one button which triggers for example A1 off - the res of
the macro is handled by the PC. I.E When A1 OFF run the bedtime macro ,
the IR7243 isn't the bottle neck, it's the X10 Protocol but I've never had
any trouble at all - though I am only sending it two commands.

I did some testing when setting up, I could point the Pronto in the
general direction of the AV rack, push the button on the Pronto and the
lights would go off before I managed to put the remote down.. besides that
we're not talking time-critial here, I'd aim for 1 command every 0.5 sec
max..

A.







Stuart Grimshaw <stuart@xxxxxxx>
01/06/2001 14:43
Please respond to ukha_d


To:     UKHA List <ukha_d@xxxxxxx>
cc:
Subject:        [ukha_d] IR7243 send gap

I baught an IR7243 from Letautomate the other day (less than 24hrs from
order
to doorstep!!), and I'm writing a Misterhouse script to respond to the
signals it sends out.

I've downloaded one of the pronto CCF's from remotecentral (I went for
some
shady character called Timothy Morris, sounds dodgy to me :-) on Ant's
advice
I went for the older single house code version, and I'm going to build my
macros around the ir7243 sending a series of signals, ie a 1 followed by a
1
is "We're going to bed" and that will fire off a predefined macro
(outside

lights to let the dog go and pee, turn the TV on upstairs and set a timer
to
switch it off in an hour or so, that kind of thing)

Does anyone else have this kind of setup with their pronto? what kind of
delay do you put in between the X10 IR going out of the pronto? How
quickly
can the IR7243 respond?

--
,,,
(o o)
===========================oOO==(_)==OOo==============================
Stuart Grimshaw         www.schoolsnet.com          sg@xxxxxxx
Special Projects Developer                            t: 07976 625221
Schoolsnet LTD             .oooO  Oooo.               f: 0870 7060260
===========================(   )==(   )===============================
\ (    ) /
\_)  (_/



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/







*********************** DISCLAIMER **************************
This message is intended only for use by the person
to whom it is addressed. It may contain information
that is privileged and confidential. Its content does
not constitute a formal commitment by Lombard Odier.
If you are not the intended recipient of this message,
kindly notify the sender immediately and destroy this
message. Thank you.
*************************************************************



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/




Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.