The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Splitting S-Video feed...


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Splitting S-Video feed...
  • From: "Phil Harris" <phillip.harris1@xxxxxxx>
  • Date: Tue, 24 Jul 2001 19:19:10 +0100
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

If you're wanting a switcher then the IR return is a must otherwise all
hell
will break loose when you try to control stuff!

Phil

> -----Original Message-----
> From: Kenneth Watt [mailto:kennethwatt@xxxxxxx]
> Sent: 24 July 2001 18:17
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] Splitting S-Video feed...
>
>
> Who cares about IR return...switcher :->
>
> K.
>
> -----Original Message-----
> From: Phil Harris [mailto:phillip.harris1@xxxxxxx]
> Sent: 24 July 2001 16:00
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] Splitting S-Video feed...
>
> Cheers Keith ...
>
> I had wondered about this and whether it would be possible t  remove
the
> termination on a KAT5 but had decided to try to keep them
"standard" so
> that
> at a later date I didn't have t  remember which units had been
> butchered^H^H^H^H^H^H^H^H^H^Hmodified.
>
> Obviously if I'm now looking t  pipe OnDodgy as well as DVD then the
> need
> for a switcher is far more pressing ;->
>
> Any more progress on the IR return dude?
>
> Phil
>
> > -----Original Message-----
> > From: Keith Doxey [mailto:ukha@xxxxxxx]
> > Sent: 24 July 2001 13:23
> > To: ukha_d
> > Subject: RE: [ukha_d] Splitting S-Video feed...
> >
> >
> > How about ZERO COST!
> >
> > Make up a lead by cutting an S-Video lead in half.
> >
> > One plug goes into your DVD player, the other into your AV amp.
> > Terminate BOTH the cut ends on the SCART Plug.
> >
> > After you have done this the units will still be double
terminated but
> if
> > you remove the lid off the KAT5 and remove the tw  75 ohm
resistors
> marked
> > R307 & R 407 you will remove the KAT5 termiantion and it will
be
> looped
> > through and terminated by your amp.
> >
> > Keith
> >
> > -----Original Message-----
> > From: Phil Harris [mailto:phillip.harris1@xxxxxxx]
> > Sent: 24 July 2001 12:16
> > To: ukha_d@xxxxxxx
> > Subject: [ukha_d] Splitting S-Video feed...
> >
> >
> > Anyone know where I can find an S-Video splitter at a reasonable
> > price that
> > won't double terminate the line? (£200 is not a reasonable price
by
> the
> > way!)
> >
> > I need t  split a single S-Video output t  go t  my AV amp *AND*
t  a
> KAT5
> > feeding the TV upstairs.
> >
> > Cheers
> >
> > Phil
> >
> >
> >
> >
> > ____________________________________
> > Automated Home UK
> > http://www.automatedhome.co.uk
> > ____________________________________
> >
> > Your use of Yahoo! Groups is subject t
> http://docs.yahoo.com/info/terms/
> >
> >
> >
> >
> >
> >
> > ____________________________________
> > Automated Home UK
> > http://www.automatedhome.co.uk
> > ____________________________________
> >
> > Your use of Yahoo! Groups is subject t
> http://docs.yahoo.com/info/terms/
> >
> >
> >
>
>
>
>
> ____________________________________
> Automated Home UK
> http://www.automatedhome.co.uk
> ____________________________________
>
> Your use of Yahoo! Groups is subject t
> http://docs.yahoo.com/info/terms/
>
>  _________________________________________________________ Do You
> Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com
>
>
>
> ____________________________________
> Automated Home UK
> http://www.automatedhome.co.uk
> ____________________________________
>
> Your use of Yahoo! Groups is subject t  http://docs.yahoo.com/info/terms/
>
>
>



Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.