The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Pronto !!! 1mb or 2mb


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Pronto !!! 1mb or 2mb
  • From: "Timothy Morris" <timothy.morris@xxxxxxx>
  • Date: Sat, 21 Jul 2001 19:54:26 +0100
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

I've got loads of icons in mine. Run it through the ccf compression utility available in the utilities section on Remote Central.
 
Tim.
-----Original Message-----
From: Robin Edwards [mailto:robin@xxxxxxx]
Sent: 21 July 2001 19:39
To: ukha_d@xxxxxxxSubject: Re: [ukha_d] Pronto !!! 1mb or 2mb

Phil,
    Yes I do, thought it was a good way to get buy-in from SWMBO.  In fact normally the rest of family key in the numbers or use the Channel +/- buttons on right.  Perhaps I'll ditch a load of the less used icons and revert t buttons from the set Daniel Tonks provides if it makes that much difference.
 
    robin
----- Original Message -----
Sent: Saturday, July 21, 2001 7:14 PM
Subject: RE: [ukha_d] Pronto !!! 1mb or 2mb

Do you use icons for the Sky channels - that takes up a lot of space.
 
Phil
-----Original Message-----
From: Robin Edwards [mailto:robin@xxxxxxx]
Sent: 21 July 2001 19:22
To: ukha_d@xxxxxxx
Subject: Re: [ukha_d] Pronto !!! 1mb or 2mb

I havea1MB Pronto,and I'm starting t look t using it with my fledgling HA setup.  Currently it reports 42% memory free.  I can't believe my setup is as complex as those of you wh have HA integrated.  What tricks do you use t reduce memory usage.
 
Currently, it controls LD, DVD, TV, Video, Amp and Sky.  In addition I have 3 macros to setup wh le rig for Sky, DVD or LD from an 'all off' status.  I've also set a dummy panel for each piece of equipment where I have the codes learnt then point t them from buttons/macros, that seemed t save alot of space as you only have each IR saved once. 
 
What else have people done?
 
robin
----- Original Message -----
Sent: Saturday, July 21, 2001 9:00 AM
Subject: RE: [ukha_d] Pronto !!! 1mb or 2mb

Campbell

 

I would agree as well, the 1Mb Pronto is fine and I replaced ten remotes plus put a shed load of graphics for all the channel on Sky and ON Digital on my 1Mb and it was fine, still some memory free. Unless you really need the extra memory for something I wouldn’t bother.

 

HTH

 

K.

 

-----Original Message-----
From: Phil Harris [mailto:phillip.harris1@xxxxxxx]
Sent: 21 July 2001 00:31
To: ukha_d@xxxxxxxSubject: RE: [ukha_d] Pronto !!! 1mb or 2mb

 

Agreed ... I have a fairly large number of remotes on my 1Mb Pronto (including the setup remote for my CRT projector which is a demon of  a thing) and I still have 65% memory free...

 

Phil

-----Original Message-----
From: Graham Howe [mailto:graham@xxxxxxx]
Sent: 20 July 2001 23:48
To: ukha_d@xxxxxxxSubject: RE: [ukha_d] Pronto !!! 1mb or 2mb

I am in the process of completely rebuilding my CCF file for my 1Mb Pronto. At the moment I have got as far as loading 500 buttons and learning Ir codes against each of them. I still have 75% memory free. As far as I can see, the only way you are likely t require the 2Mb version is if you are going t have lots of fancy graphics, background pictures and large CD jukebox listings. There is no way you are going t run out of memory if you are simply replacing other remotes.

 

Graham




____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________


Your use of Yahoo! Groups is subject t the Yahoo! Terms of Service.




____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________


Your use of Yahoo! Groups is subject t the Yahoo! Terms of Service.





____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________


Your use of Yahoo! Groups is subject t the Yahoo! Terms of Service.



____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________


Your use of Yahoo! Groups is subject t the Yahoo! Terms of Service.



____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________


Your use of Yahoo! Groups is subject t the Yahoo! Terms of Service.



____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________


Your use of Yahoo! Groups is subject t the Yahoo! Terms of Service.



____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________


Your use of Yahoo! Groups is subject t the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.